|
|
|
|
|
|
Custom s300 Turbos
|
List Price: $1,600.00
Our Price: $1,399.00
Sale Price: $1,395.00
You Save $205.00
|
|
|
Quality custom build s300 turbo choose configuration that fits your needs
|
|
|
|
|
|
|
|
|
|
|
|
|
Smarty 2003-2007
|
|
Our Price: $685.00
|
|
|
Up to 230HP with TNT software download
Fast guide to Smarty’s special Features
* CaTCHER software's inside
* Ten different performance levels.
* Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model.
* ABS tire height updates in just few seconds.
* Not traceable in the stock setting. Smarty leaves no footprint.
* Manual High Idle is enabled in all softwares
* Reads Diagnostic Trouble Codes in plain text.
* No tools required, no fuses to pull.
* USB built in for simple updates .
* Most complete keyboard in the industry.
* Reliable, it works off your OEM hardware.
* Programmable Speed Limiter from 25 to 250 mph
The horsepower settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a save limit. With "Save" I mean
save for your tranny and rest of the driveline.
* SW # 0 : Half power
* SW # 1 : 30 Hp increase, with added timing .
* SW # 2 : 60 Hp increase, no added timing.
* SW # 3 : 60 Hp increase, with added timing.
* SW # 4 : 90 Hp increase, no added timing.
* SW # 5 : 90 Hp increase, with added timing.
* SW # 6 : 130 Hp increase, no added timing.
* SW # 7 : 130 Hp increase, with added timing.
* SW # 8 : 170 Hp increase, no added timing.
* SW # 9 : 170 Hp increase, with added timing.
|
|
|
|
|
|
|
|
|
|
|
|
|
DDRP-04
|
|
Our Price: $312.55
|
|
|
FASS DDRP pump for 2003-2004.5 Dodge trucks
Increase the life of your CP3 by making sure it has enough fuel to cool your $1000 injection pump.
|
|
|
|
|
|
|
|
|
|
|
|
|
TunnelRam CR 03-07
|
|
Our Price: $255.00
|
|
|
The Tunnel Ram is a new patented intake for the 98-07 Dodge Cummins 24V diesel engine. It's unique design increases the airflow into the head, which is a known choke point, and distribute the air charge more uniformly between cylinders. Proudly made in the USA of aircraft quality billet aluminum and pressure tested to over 200psi, The Tunnel Ram is able to withstand high boost much better than the stock cast plate. What does that mean to you? Faster spool-up for your turbo, lower EGTs (especially in cylinders 1, 5 & 6 which are prone to run hot) and better MPGs.
The Tunnel Ram was built to be a direct bolt-in replacement for the stock plate and fits with all stock and most aftermarket performance intake/fueling accessories. The compound angles of The Tunnel Ram keep the factory location of the intercooler boot as well. No special tools needed and installation is a breeze, takes less than an hour to install on a cool engine.
Don't suffocate your Cummins any longer, let it breathe with The Tunnel Ram!
(FREE SHIPPING in the USA lower 48!)
Available for VP Dodge Cummins diesel trucks from 1998-2002 and for CR for Dodge Cummins diesel trucks from 2003-2007
|
|
|
|
|
|
|
|
|
|
|
|
|
Airdog 100, 150 or Airdog II 165 Fuel System
|
List Price: $529.00
Our Price: $529.00
Sale Price: $499.00
You Save $30.00
|
|
|
- Airdog Fuel Pumps provide excellent flow and fuel pressure.
- Airdog 100 will support up to 500HP
- Airdog 150 and Airdog II 165 will support up to 800HP
|
|
|
|
|
|
|
|
|
|
|
|
|
Dodge Steering Stabilizer Brace 2003 and up
|
List Price: $225.00
Our Price: $189.00
Sale Price: $169.00
You Save $56.00
|
|
|
This brace is designed to prevent failure of the steering gear on Dodge trucks. The brace supports the sector shaft in the steering gear eliminating the side play that creates premature failure and steering that seems to wander driving down the road. The brace also ties the frame horns together to help prevent frame flex.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gear Puller
|
Our Price: $39.99
Sale Price: $35.99
You Save $4.00
|
|
|
Gear puller for Bosch VP44, P7100, CP3 and VE pumps
|
|
|
|
|
|
|
|
|
|
|
|
|
Smarty Jr 2003-2007
|
|
Our Price: $495.00
|
|
|
CaTCHER software's inside
Three different performance levels: 40 / 70 / 100 hp
Improved fuel economy
Optimized drivability
Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model
ABS tire height updates in just few seconds from 22,5" to 44"
Not traceable in the stock setting. Smarty leaves no footprint
Manual High-Idle is enabled in all softwares
Reads Diagnostic Trouble Codes in plain text
No tools required, no fuses to pull
USB built in for simple updates from internet
Easy installation
Reliable, it works off your OEM hardware
Now with the Power on Demand function!!!
The horsepower settings have a modified "Torque management" ( TQM ). The throttle response is greatly improved but is set to a safe limit. With "Safe" I mean safe for your tranny and rest of the driveline.
* SW # 1 : 40 Hp increase
* SW # 2 : 70 Hp increase
* SW # 3 : 100 Hp increase
Tested on stock trucks on a Dyno. Stock means just that. Stock! Even the air filters were stock...The trucks were S T O C K, even the wastegate settings! The "baseline" was checked( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about the findings. The above declared HP numbers are all rounded down to the closest number.
|
|
|
|
|
|
|
|
|
|
|
|
|
D-tech s300 turbo 64mm 64/65/12
|
|
Our Price: $1,295.00
|
|
|
s300 Turbo 64/65/12 supports up to 550HP. 1 Year warranty.
Great towing turbo, exhaust housing scroll has been tightened to make it spool faster. Specify fit for year and exhaust outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
D-tech s300 turbo 62mm 62/65/12
|
|
Our Price: $1,149.00
|
|
|
s300 Turbo 62/65/12 supports up to 470HP. 1 Year warranty.
Great towing turbo, exhaust housing scroll has been tightened to make it spool faster. Specify fit for year and exhaust outlet.
|
|
|
|
|
|
|
