|
|
|
|
|
|
ScangaugeII
|
Our Price: $159.95
|
|
|
On board monitoring system for 1996+ OBDII compliant vehicles
for a full list of features see http://www.scangauge.com/
TRIP COMPUTER/DIGITAL GAUGES/SCANNER
Vehicle Specific Gauges
Instantaneous HorsePower
Cost Per Mile/Cost Per Trip
|
|
|
|
|
|
|
|
|
|
|
|
|
BoostBolt
|
List Price: $11.99
Our Price: $9.99
Sale Price: $9.99
You Save $2.00
|
|
|
Boost Bolt replaces the 2nd bolt on the intake manifold/horn and will allow you to use the fitting for a boost pressure. No drilling/tapping necessary. Easy gauge install with a Boost Bolt.
Do not install in the forward most bolt hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bigline kit 24v
|
|
Our Price: $39.00
|
|
|
Better fuel fittings increase flow. Works for VP44 and CP3 pumps. Excellent fuel upgrade for stock, DDP, HPFP and Raptor pumps. On a Stock VP44 truck it will raise fuel pressure about 2psi at full throttle. Has access port for fuel pressure or low pressure light.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Pressure Sensor from Diesel Auto Power
|
|
Our Price: $65.00
|
|
|
Quality replacement that works on Quadzilla Adrenaline and other products. Access port sold separately. Recommend "tapped 90" for Airdog install, or "big line kit" if not already installed. Tapped Banjo Bolt will also work. Snubber also recommended.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trans temp adapter
|
|
Our Price: $24.00
|
|
|
No need to drill and tap to install your transmission temperature. This goes over the trans line and is secured by a clamp, has a port for sending unit. Temps will read slightly lower than actual.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tapped Banjo Bolt with sealing washers
|
|
Our Price: $12.50
|
|
|
Tapped banjo Bolt for easy fuel pressure access on the Cummins engine. 12mm with a 1/8 NPT port.
Fits all 5.9 fuel filter canisters and all VP44 and CP3 injection pumps. comes with seals. Plated steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Isspro EV2 Gauge Package 3 gauges for a great deal
|
|
Our Price: $345.00
|
|
|
Isspro Electric Gauges. LED Back-Lit. All accessories included for install. Includes the potentiometer/dimmmer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3rd Gen EV2 Gauge Package 60psi + RP + egt
|
|
Our Price: $475.00
|
|
|
Gauge package 3rd Gen EV2 Gauge Package 60psi + RP + egt, gray pod
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trans temp adapter
|
|
Our Price: $30.00
|
|
|
Install the transmission temp sensor without drilling or tapping. (temps will be a few degrees higher than actual reading.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
drill-tap 1/8npt
|
|
Our Price: $10.00
|
|
|
Drill and tap for gauges
|
|
|
|
|
|
|
