|
|
|
|
|
|
PacBrake Valet/Override switch, C18053
|
|
Our Price: $90.00
|
|
|
Override the power of your vehicle with the flick of a switch! By preventing full fuel flow to the injectors, this kit has the ability to cut your engine's horsepower by approximately 1/2. This switch was designed for situations when you don’t want the vehicle operator to experience the full power of your engine. It’s great for kids driving their parents truck, valet drivers, or just anyone who doesn’t feel comfortable will all that power.
|
|
|
|
|
|
|
|
|
|
PacBrake Performance Override Switch (Valet Switch) 94-98 5.9L Dodge Cummins 12 Valve HP18053
|
|
Our Price: $93.60
|
|
|
Override the power of your vehicle with the flick of a switch! By preventing full fuel flow to the injectors, this kit has the ability to cut your engine's horsepower by approximately half. This switch was designed for situations when you don’t want the vehicle operator to experience the full power of your engine. It’s great for kids driving their parents truck, valet drivers, or just anyone who doesn’t feel comfortable will all that power.
|
|
|
|
|
|
|
|
|
|
Air Horn Kit, for all vehicles with onboard air
|
|
Our Price: $125.00
|
|
|
Let’em know you’re there with Pacbrake’s air horns. Our easy to install air horn kits come with a 12V solenoid , airline, mounting hardware, brass fittings, and chrome plated air horns. Max sound output is 120 db / 235 hz with a max operating pressure of 12 - 130 PSI. For operation, the vehicle must have onboard air.
|
|
|
|
|
|
|
|
|
|
PacBrake 2-inch Leveling Kit 1994-2011 5.9L / 6.7L Dodge Cummins 4x4 HP10026
|
|
Our Price: $144.38
|
|
|
Diesel engines are very heavy and they produce incredible amounts of torque. These factors put pressure on the front coil springs used in Dodge trucks (1994+). Over time, the additional weight reduces the height of the front suspension, causing it to sit much lower than the rear. Pacbrake has a solution by installing our lightweight cast aluminum spacers above the factory coil springs to level the vehicle’s stance.
But let's be honest, most of us want a leveling kit as an inexpensive way of lifting the front of the truck to fit larger tires. Most Dodge Rams can fit a 35" tire (depending on wheel backspacing/offset) with only the addition of the leveling kit. Installation is relatively simple and can be installed typically within just a few hours. We recommend having a front end alignment after installation of the leveling kit.
|
|
|
|
|
|
|
|
|
|
PacBrake Max Flow Power Elbow 94-02 5.9L Dodge Cummins 12V / 24V C44083
|
|
Our Price: $268.00
|
|
|
This 4" cast iron elbow is designed to replace the restrictive stock Dodge elbow and increase your exhaust flow and gas mileage. Gain horsepower and torque, while eliminating turbo lag and lowering exhaust gas temperatures, with Pacbrake's Max Flow Dodge Elbow.
LOWER EGTs | NO TURBO LAG | MORE MILES PER GALLON
|
|
|
|
