Join our mailing list!
You are here: Home > Smarty
Find by Pricing
Below 645 (1)
645 and Above (4)
Sort By:
Page of 1
Smarty Jr 2003-2007
Our Price: $495.00

CaTCHER software's inside
Three different  performance levels: 40 / 70 / 100 hp
Improved fuel economy
Optimized drivability
Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model
ABS tire height updates in just few seconds from 22,5" to 44"
Not traceable in the stock setting. Smarty leaves no footprint
Manual High-Idle is enabled in all softwares
Reads  Diagnostic Trouble Codes in plain text
No tools required, no fuses to pull
USB built in for simple updates from internet
Easy installation
Reliable, it works off your OEM hardware
Now with the Power on Demand function!!!


     The horsepower settings have a modified "Torque management" ( TQM ). The throttle response is greatly improved but is set to a safe limit. With "Safe" I mean safe for your tranny and rest of the driveline.


   * SW # 1 : 40 Hp increase
   * SW # 2 : 70 Hp increase
   * SW # 3 : 100 Hp increase

       Tested on stock trucks on a Dyno. Stock means just that. Stock! Even the air filters were stock...The trucks were S T O C K, even the wastegate settings! The "baseline" was checked( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about the findings. The above declared HP numbers are all rounded down to the closest number.
SMARTY programmer for Dodge Cummins Diesel 98-02 S-03
Our Price: $645.00

CaTCHER software's inside
Ten different  performance levels
Fastest download in the industry, a typical ECM update takes
less than two minutes
ABS tire height updates in just seconds
Not traceable in the stock setting. Smarty leaves no footprint
Cold weather 3 Cylinder High Idle is enabled in all softwares
Reads  Diagnostic Trouble Codes in plain text
No tools required, no fuses to pull
USB built in for simple updates
Most complete keyboard in the industry
Reliable, it works off your OEM hardware
Programmable Speed Limiter from 25 to 250 mph
Smarty 2003-2007
Our Price: $685.00

Up to 230HP with TNT software download

Fast guide to  Smarty’s special Features

   * CaTCHER software's inside
   * Ten different  performance levels.
   * Fastest download in the industry, up to three times faster than
     the competition, a typical ECM update takes about 3.5 to 5
     minutes, depending on the truck model.
   * ABS tire height updates in just few seconds.
   * Not traceable in the stock setting. Smarty leaves no footprint.
   * Manual High Idle is enabled in all softwares
   * Reads  Diagnostic Trouble Codes in plain text.
   * No tools required, no fuses to pull.
   * USB built in for simple updates .
   * Most complete keyboard in the industry.
   * Reliable, it works off your OEM hardware.
   * Programmable Speed Limiter from 25 to 250 mph
     The horsepower settings. except #0, all other softwares have a
     modified "Torque management" ( TQM ). The throttle response
     is greatly improved but is set to a save limit. With "Save" I mean
     save for your tranny and rest of the driveline.


   * SW # 0 : Half power
   * SW # 1 : 30 Hp increase, with added timing .
   * SW # 2 : 60 Hp increase, no added timing.
   * SW # 3 : 60 Hp increase, with added timing.
   * SW # 4 : 90 Hp increase, no added timing.
   * SW # 5 : 90 Hp increase, with added timing.
   * SW # 6 : 130 Hp increase, no added timing.
   * SW # 7 : 130 Hp increase, with added timing.
   * SW # 8 : 170 Hp increase, no added timing.
   * SW # 9 : 170 Hp increase, with added timing.
Smarty 6.7L Smarty ME 2010-2012 dpf programmer
Our Price: $685.00

Smarty 6.7L Smarty ME 2010-2012
Smarty 6.7L Smarty ME 2007.5-2009 dpf programmer
Our Price: $685.00

Smarty 6.7L Smarty ME 2007.5-2009