|
|
|
|
|
|
Custom s300 Turbos
|
List Price: $1,600.00
Our Price: $1,399.00
Sale Price: $1,395.00
You Save $205.00
|
|
|
Quality custom build s300 turbo choose configuration that fits your needs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HX40Flange
|
|
Our Price: $29.00
|
|
|
Steel HX40 flanges are machined to allow use of 4in.16 ga. or 3.5 in. OD pipe. Will mate up to your HX40 or aftermarket S300 variants with HX40 style exhaust housings. Use for making down pipes or hot pipes.
Great for those building a custom compound set.
|
|
|
|
|
|
|
|
|
|
|
|
|
HX40CLAMP
|
|
Our Price: $26.00
|
|
|
Stainless Steel HX40 V-Band Clamp
Fits HX40 style flanges to Fits HX40 and S300
|
|
|
|
|
|
|
|
|
|
|
|
|
BOOSTELBOW
|
List Price: $25.00
Our Price: $21.99
Sale Price: $21.99
You Save $3.01
|
|
|
Adjustable Boost Elbow
* Allows you to increase the boost on your turbo to above the 21psi stock setting and up to 35psi or more.
* Installs in place of the brass fitting on the compressor housing.
* Takes 5 minutes for install.
* Raising your boost will allow the turbo to send more air into the engine so that it can burn the extra fuel from modifications like a performance box or injectors.
* Fits HX35, HX40, s300 etc. (does not fit the HY35 with the hard line)
* Has Allen screw to adjust the amount of air that the turbo compressor side allows to reach the actuator for the waste gate.
|
|
|
|
|
|
|
|
|
|
|
|
|
HE351 Adapter Flange
|
|
Our Price: $48.00
|
|
|
Steel Flange that can be welded to Exhaust pipe and used as turbo exhaust flange for HE351 or HX40 style turbo depending on which side you use.
or can be used to adapt a large flange HE351 turbo found on 04.5+ Dodge Truck on to a an adapter you will need a hx40 v-band clamp and HE351 style V-Band Clamp
|
|
|
|
|
|
|
|
|
|
|
|
|
HE351 Vband Clamp for 3rd gen turbo
|
|
Our Price: $44.00
|
|
|
HE351 Clamp, has hx40 flange on other end. Use to weld on to 4" pipe for either HX40 or HE351 flange, or use with and existing flange to adapt to the other size. Clamp and nut only
|
|
|
|
|
|
|
|
|
|
|
|
|
Tunnel Ram 2nd gen dodge VP44 98-02
|
|
Our Price: $235.00
|
|
|
Increases the airflow into the head, distributes the air charge more uniformly between cylinders. Faster spool-up for your turbo, lower EGTs (especially in cylinders 1, 5 & 6 which are prone to run hot) and better MPGs.
The Tunnel Ram was built to be a direct bolt-in replacement for the stock plate and fits with all stock and most aftermarket performance intake/fueling accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
HX40 Downpipe and clamp for 1994-2002
|
List Price: $160.00
Our Price: $145.00
Sale Price: $145.00
You Save $15.00
|
|
|
4" Downpipe for S300 or HX40 turbo. Has flared end for easy install. Use for install of s300 or hx40 or to be used on 2nd gen manifold swap for 3rd gen truck. (clamp included)
|
|
|
|
|
|
|
|
|
|
|
|
|
D-tech s300 turbo 64mm 64/65/12
|
|
Our Price: $1,295.00
|
|
|
s300 Turbo 64/65/12 supports up to 550HP. 1 Year warranty.
Great towing turbo, exhaust housing scroll has been tightened to make it spool faster. Specify fit for year and exhaust outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
D-tech s300 turbo 62mm 62/65/12
|
|
Our Price: $1,149.00
|
|
|
s300 Turbo 62/65/12 supports up to 470HP. 1 Year warranty.
Great towing turbo, exhaust housing scroll has been tightened to make it spool faster. Specify fit for year and exhaust outlet.
|
|
|
|
|
|
|
