| |
Welcome.
Welcome to DieselAutoPower.com where you can find performance parts for your Dodge, Chevy or Ford truck.
|
|
|
BOOSTELBOW
|
|
HX40Flange
|
List Price: $25.00
Our Price: $21.99
Sale Price: $21.99
You Save $3.01
|
|
|
|
Our Price: $29.00
|
|
|
|
|
Adjustable Boost Elbow
* Allows you to increase the boost on your turbo to above the 21psi stock setting and up to 35psi or more.
* Installs in place of the brass fitting on the compressor housing.
* Takes 5 minutes for install.
* Raising your boost will allow the turbo to send more air into the engine so that it can burn the extra fuel from modifications like a performance box or injectors.
* Fits HX35, HX40, s300 etc. (does not fit the HY35 with the hard line)
* Has Allen screw to adjust the amount of air that the turbo compressor side allows to reach the actuator for the waste gate.
|
Steel HX40 flanges are machined to allow use of 4in.16 ga. or 3.5 in. OD pipe. Will mate up to your HX40 or aftermarket S300 variants with HX40 style exhaust housings. Use for making down pipes or hot pipes.
Great for those building a custom compound set.
|
|
|
|
SMARTY programmer for Dodge Cummins Diesel 98-02 S-03
|
|
DDRP-02
|
|
Our Price: $685.00
|
|
|
|
Our Price: $274.55
|
|
|
|
|
CaTCHER software's inside
Ten different performance levels
Fastest download in the industry, a typical ECM update takes
less than two minutes
ABS tire height updates in just seconds
Not traceable in the stock setting. Smarty leaves no footprint
Cold weather 3 Cylinder High Idle is enabled in all softwares
Reads Diagnostic Trouble Codes in plain text
No tools required, no fuses to pull
USB built in for simple updates
Most complete keyboard in the industry
Reliable, it works off your OEM hardware
Programmable Speed Limiter from 25 to 250 mph
|
FASS DDRP pump for 1998.5-2002 Dodge trucks
Increase the life of your VP44 by making sure it has enough fuel to cool your $1000 injection pump.
Application
1998.5-2002 Dodge Ram Cummins Diesel 5.9L 24 Valve
Features
Superior quality to OEM
Protects Injector pump from failure
Simple Installation
40 gallons per hour @ 13-15 psi
Stock is only good for about 30 gallons per hour at 9-12psi.
Includes
FASS DDRP Pump
3/8" Fuel Line
Hardware and Fittings
Installation Manual
# Requires 30 minutes or less installation time.
# Mounts to the factory supplied bracket
# Provides a 33% increase in fuel delivery rate over the OEM pump design
# Provides better torque and engine response by insuring a constant reliable flow of fuel.
# DDRP is protected by a 4 year Warranty upon completion of Warranty Card
# DDRP is the only replacement pump available with a 4 year Warranty.
# The DDRP's Heavy Duty Motor uses over sized bearings on the motor shaft to make sure its well supported.
# THE DDRP's Heavy Duty motor provides High Torque to Gear Ratio to Insure Cold Weather Starts.
# The DDRP motor has more torque than the stock lift pump to ensure you don't have a problem with cold weather starts.
# DDRP draws around the same amount of amperage the stock pump does so it can make use of the wire harness.
# DDRP is strong enough to push B-20 and B-50 Fuels in the warmer months of the year.
|
|
|
|
Smarty 2003-2007
|
|
Custom s300 Turbos
|
|
Our Price: $685.00
|
|
|
List Price: $1,600.00
Our Price: $1,399.00
Sale Price: $1,395.00
You Save $205.00
|
|
|
|
|
Up to 230HP with TNT software download
Fast guide to Smarty’s special Features
* CaTCHER software's inside
* Ten different performance levels.
* Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model.
* ABS tire height updates in just few seconds.
* Not traceable in the stock setting. Smarty leaves no footprint.
* Manual High Idle is enabled in all softwares
* Reads Diagnostic Trouble Codes in plain text.
* No tools required, no fuses to pull.
* USB built in for simple updates .
* Most complete keyboard in the industry.
* Reliable, it works off your OEM hardware.
* Programmable Speed Limiter from 25 to 250 mph
The horsepower settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a save limit. With "Save" I mean
save for your tranny and rest of the driveline.
* SW # 0 : Half power
* SW # 1 : 30 Hp increase, with added timing .
* SW # 2 : 60 Hp increase, no added timing.
* SW # 3 : 60 Hp increase, with added timing.
* SW # 4 : 90 Hp increase, no added timing.
* SW # 5 : 90 Hp increase, with added timing.
* SW # 6 : 130 Hp increase, no added timing.
* SW # 7 : 130 Hp increase, with added timing.
* SW # 8 : 170 Hp increase, no added timing.
* SW # 9 : 170 Hp increase, with added timing.
|
Quality custom build s300 turbo choose configuration that fits your needs
|
|
|
|
|
|
Today's Super Deal! |
|
|
|
Diesel injectors 24v
|
List Price: $350.00
Our Price: $299.00
Sale Price: $249.00
You Save $101.00
|
|
|
|
Injectors for Dodge Cummins 24v 1998.5-2002. Choose your HP needs.
|
|
|
|
 |
|
