DAP Screaming Eagle GX-E 57/65/14 T3 Gated

DAP Screaming Eagle GX-E 57/65/14 T3 Gated is an excellent upgrade turbo for the guys looking for better egt control without sacrificing drivability. This turbo uses the latest SXE technology with a FMW compressor and 360* Thrust Bearing. It retains the compact compressor cover for a near factory look. This turbo is great for a quick spooling 400-500HP (350-400HP for 1st gen) that tows and daily drives. The 65mm turbine wheel will spool fast and offer excellent driving manners. One improved feature on the GX-E S357 13749880014 is the compressor wheel: 57.1mm inducer and a smaller 76.2mm exducer so it has less rotating mass and can spool faster.

This turbo will support a 350-500HP depending on elevation, turbine choice and engine modifications. It flows approximately 67 lbs/minute

Injector recommendations for a 1998.5-2002 with a big programmer would be 75HP- 150HP
Injector recommendations for a 1994-1998 would be 5x.011, 5x.012, 6x.011, 7x.010
Injector recommendations for a 1989-1993 would be 5x.012, 6x.011, 7x.010

Items Needed for Install:
• HX40 4" Downpipe
• HX40 Clamp
• 4" Turbo Back Exhaust
• 1989-1993 will need to purchase a new oil inlet fitting or a new top oil line (recommended)
• (Recommended) Flexible Oil Drain Line for Easier Installation

Accessories Included:
• Adjustable Boost Elbow
• Oil Drain Gasket
• Uses factory Oil Drain Bolts
• 2x 3/8" Turbo/Manifold Mounting Bolts
• 2x 3/8" Nuts
• T3 or T4 Turbo/Manifold Gasket