DAP Screaming Eagle SXE FMW 2nd Gen Fit 64/68/.83AR Long T4 Non-Gated HX40SXE2G646883N40T4L is a step towards a performance turbo.The 68mm turbine wheel will spool relatively fast and will be a great all around turbo for performance, towing and daily driving.The DAP Screaming Eagle SXE is built on the latest technologies from Borg Warner AirWerks® SX-E.
This turbo will support a maximum of 575-650HP depending on elevation, turbine choice engine modifications. It flows approximately 82 lbs/minute. By comparison the stock HX35w turbo flows about 52lbs/minute and will support about 325HP on a 94-02.
Injector recommendations for a 1998.5-2002 with a big programmer would be 225-275HP
Injector recommendations for a 1994-1998 would be 5x.014, 5x.016, 6x.013, 7x.012
Injector recommendations for a 1989-1993 would be 5x.014, 5x.016, 6x.013, 7x.012
Detailed Build of DAP SXE2G646883N40T4L:
• BorgWarner Part #: 13009097008,S300SXE 8776 (S364)
Compressor Wheel Details:
• Compressor Inducer: 64.47mm
• Compressor Exducer: 87.37mm
• Compressor flow: 82 lbs/minute
• Compressor outlet is machined for the 2.91" flange found on 1991.5-2002 Dodge
• Compressor Inlet: 4"
Turbine Wheel Details:
• Made From Heat Resistant Inconel 713C
• Turbine Exducer: 67.56mm
• Turbine Inducer: 76.2mm
Turbine Housing Detailed Description:
• Turbine Housing Part #: 179069-HX40
• Turbine Size: 0.83AR Long,
• Turbine Inlet: T4, Divided/Twin Volute, Non gated
• Turbine Outlet: HX40 4.0"
• Actuator: Not applicable
• 360 degree severe duty thrust bearing
• Integrated speed sensor port
• Pre-machined boost port
• Optimized compressor stage aerodynamics