Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

Diesel Auto Power


SKU: DAP-SXE2G667388N40T4
0

DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40


DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40
Purchase DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40
  • SKU: DAP-SXE2G667388N40T4
    0

    DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40

  • Brand: Diesel Auto Power Application: 1991.5-2002 Dodge Cummins 5.9L
  • $1,095.00

Product description

DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40SXE2G667388N40T4 is a performance turbo. The 73.4mm turbine wheel will flow a lot of air and keep drive pressure low. More suitable for performance,and high rpm fun than towing and daily driving.The DAP Screaming Eagle SXE is built on the latest technologies from Borg Warner AirWerks® SX-E. 

This turbo will support a maximum of 600-700HP depending on elevation, turbine choice engine modifications. It flows approximately 88 lbs/minute. By comparison the stock HX35w turbo flows about 52lbs/minute and will support about 325HP on a 94-02.

Injector recommendations for a 1998.5-2002 with a big programmer would be 275-350HP
Injector recommendations for a 1994-1998 would be 5x.016, 5x.018, 7x.012, 7x.014
Injector recommendations for a 1989-1993 would be 5x.016, 5x.018, 5x.018 HOT, 7x.012, 7x.014, 7x.016



Detailed Build of DAP SXE2G667388N40T4:

• BorgWarner Part #: 13009097049,S300SXE 9180 (S366)

Compressor Wheel Details:

• Compressor Inducer: 66.11mm
• Compressor Exducer: 91.44mm
• Compressor flow: 88 lbs/minute
• Compressor outlet is machined for the 2.91" flange found on 1991.5-2002 Dodge
• Compressor Inlet: 4"

Turbine Wheel Details:

• Made From Heat Resistant Inconel 713C
• Turbine Exducer: 73.37mm
• Turbine Inducer: 79.76mm

Turbine Housing Detailed Description:

• Turbine Housing Part #: 177211-HX40
• Turbine Size: 0.88AR,
• Turbine Inlet: T4, Undivided/ Single Volute, Non gated
• Turbine Outlet: HX40 4.0"
• Actuator: Not applicable

Other Features:

• 360 degree severe duty thrust bearing
• Integrated speed sensor port
• Pre-machined boost port
• Optimized compressor stage aerodynamics

Features

Additional information

Items Needed for Install:

• HX40 4" Downpipe
• HX40 Clamp
• 4" Turbo Back Exhaust
• 1989-1993 will need to purchase a new oil inlet fitting or a new top oil line (recommended)
• (Recommended) Flexible Oil Drain Line for Easier Installation

Accessories Included:

• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket

Reviews

No Reviews Yet!

Review DAP Screaming Eagle SXE FMW 2nd Gen Fit 66/73.4/.88AR T4 Non-Gated HX40