DAP Screaming Eagle SXE 3rd Gen 64/73.4/14 T3 Gated

DAP Screaming Eagle SXE 64/74/14 T3 Gated is the first real step into a true performance 3rd Gen turbocharger upgrade. The 73mm turbine wheel and 14cm housing makes it a great fit for 600-700HP applications that want to daily drive and do minimal light towing. Built from Borg Warner SX-E units, it comes standard with a Forged Mill Wheel (FMW) and 360-thrust bearing for increased durability and longevity. Modified in-house for fitment in the 3rd Gen application, it uses a custom cast compressor with 90* outlet or a machined compressor outlet and 90* elbow to mate with your factory intercooler piping. This turbo will spool slower than a factory HE351CW due to the larger 73mm exhaust side, it is best fitted for hot street applications. While light towing can still be accomplished, tire size, gear ratio, and converter setups will greatly affect this. If you're looking for something for heavy towing, the smaller 68mm turbine wheel may be a better choice.

This turbo will support 700HP on a 2003-2007 5.9L Dodge depending on elevation and turbine choice and flows approximately 82 lbs/minute.

Injector recommendations
100-150HP Injectors with ECM tuning/ Programmer

Accessories Included:
Custom cast compressor cover with 90* outlet or a 2.75" Elbow with Tight Radius and Clamp with O-ring for Tight Radius Elbow for 2003-2018 Dodge Cummins

Overboost Resistor
Oil Inlet Fitting and Drain Gasket
2x 3/8 Oil Drain Mounting Bolts
2x 3/8" Turbo/Manifold Mounting bolts
2x 3/8" nuts
T3 or T4 Turbo/Manifold Gasket