Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

Diesel Auto Power


SKU: DAP-SXE3G647391N40T4
0

DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40


DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40
Purchase DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40
  • SKU: DAP-SXE3G647391N40T4
    0

    DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40

  • Brand: Diesel Auto Power Application: 2003-2007 Dodge Cummins 5.9L
  • $1,175.00

Product description

DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40SXE3G647391N40T4 is a performance turbo. The 73.4mm turbine wheel will flow a lot of air and keep drive pressure low. More suitable for performance,and high rpm fun than towing and daily driving (73.4mm turbine wheel will perform almost like stock on the 6.7L).The DAP Screaming Eagle SXE is built on the latest technologies from Borg Warner AirWerks® SX-E. 


This turbo will support 650HP on a commonrail 5.9L Dodge depending on elevation and turbine choice and flows approximately 82 lbs/minute. By comparison the stock HE351CW with 60mm compressor found on 2004.5-2007 Dodge Cummins 66lbs/minute and will support about 425HP. 2003-2004 HE341 has a smaller compressor and will support less HP.

Injector recommendations for a 2003-2007 5.9L with a big programmer would be 100-125HP Injectors with ECM tuning/ Programmer



Compressor Wheel Details:

• Compressor Inducer: 64.47mm
• Compressor Exducer: 87.37mm
• Compressor flow: 82 lbs/minute
• Compressor outlet is machined for the 90* elbow (2.91" 2nd gen style flange with elbow and clamp) for fitment on the 2003-2018 Dodge Cummins
• Compressor Inlet: 4"

Turbine Wheel Details:

• Made From Heat Resistant Inconel 713C
• Turbine Exducer: 73.37mm
• Turbine Inducer: 79.76mm
Turbine Housing Detailed Description:

• Turbine Housing Part #: 177208-HX40
• Turbine Size: 0.91AR,
• Turbine Inlet: T4, Divided/Twin Volute, Non gated
• Turbine Outlet: HX40 4.0"
• Actuator: Not applicable

Other Features:

• 360 degree severe duty thrust bearing
• Integrated speed sensor port
• Pre-machined boost port
• Optimized compressor stage aerodynamics

Features

Additional information

Items Needed for Install:

• HX40 to 4.4" HE351 adapter and HX40 Clamp. (part # 35140FL and HX40CL)
• 2004.5-2007 will need Electronic Wastegate Fooler - 1453240
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold GasketDetailed Build of DAP SXE3G647391N40T4:
• BorgWarner Part #: 13009097055,S300SXE 8780 (S364)

Accessories Included:

• 2.75" Elbow with Tight Radius for 2003-2018 Dodge Cummins
• Clamp for Tight Radius Elbow
• O-Ring Seal for Elbow
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket

Reviews

No Reviews Yet!

Review DAP Screaming Eagle SXE FMW 3rd Gen Fit 64/73.4/.91AR T4 Non-Gated HX40