Product description
DrawStraw?? 1 with two return ports!
For 1994-2004 standard tank modules. Trucks with engine or filter mounted pumps.
CNC machined billet DS1 with dual return ports allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for the second return. Makes for a super clean and secure installation, and brings all of the return fuel back into the module for replenishment during low fuel situations.
The Draw Straw?? 1 can be used in Dodge trucks with the standard fuel tank module from 1994-2004.
Comes with:
DrawStraw 1 billet unit
Nylon draw tube
3/8" and 1/2" push lock pump supply connections
5/16" OEM Dorman type male quick connect return connection
3/8" / 1/2" supply pump return connections for a regulated return system (AirDog, and all other systems)
Plug for third port if not being used.
All necessary components are included*, no need to go shopping for extra parts and no tank drilling!
AirDog and other regulated return system installations should route both return lines to the DS1 for best results.
This kit is compatible with all available pumps and pump systems for the Dodge Cummins application in 1/2 or 3/8". Please call if you have a special application.
Unit comes unassembled. Picture for representation only, aluminum parts will arrive in plain finish.
Uses your OE grommet, internal modification to fuel module required.
DS1 for standard modules only.
For trucks with in-tank pumps check The Draw Straw?? V
Picture for representation only. May come with steel or brass fittings.
*If used as an OEM replacement with a stock fuel system 18" of 3/8 fuel line will be needed
For 1994-2004 standard tank modules. Trucks with engine or filter mounted pumps.
CNC machined billet DS1 with dual return ports allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for the second return. Makes for a super clean and secure installation, and brings all of the return fuel back into the module for replenishment during low fuel situations.
The Draw Straw?? 1 can be used in Dodge trucks with the standard fuel tank module from 1994-2004.
Comes with:
DrawStraw 1 billet unit
Nylon draw tube
3/8" and 1/2" push lock pump supply connections
5/16" OEM Dorman type male quick connect return connection
3/8" / 1/2" supply pump return connections for a regulated return system (AirDog, and all other systems)
Plug for third port if not being used.
All necessary components are included*, no need to go shopping for extra parts and no tank drilling!
AirDog and other regulated return system installations should route both return lines to the DS1 for best results.
This kit is compatible with all available pumps and pump systems for the Dodge Cummins application in 1/2 or 3/8". Please call if you have a special application.
Unit comes unassembled. Picture for representation only, aluminum parts will arrive in plain finish.
Uses your OE grommet, internal modification to fuel module required.
DS1 for standard modules only.
For trucks with in-tank pumps check The Draw Straw?? V
Picture for representation only. May come with steel or brass fittings.
*If used as an OEM replacement with a stock fuel system 18" of 3/8 fuel line will be needed