DAP Screaming Eagle SXE 3rd Gen 69/73.4/14 T3 Gated

DAP Screaming Eagle SXE 69/74/14 T3 Gated is a true performance 3rd Gen turbocharger upgrade. The 73mm turbine wheel and 14cm housing makes it a great fit for 625-800HP applications that want to daily drive and do minimal light towing. Built from Borg Warner SX-E units, it comes standard with a Forged Mill Wheel (FMW) and 360-thrust bearing for increased durability and longevity. Modified in-house for fitment in the 3rd Gen application it uses a machined compressor outlet and 90* elbow to mate with your factory intercooler piping. This turbo will spool slower than a factory HE351CW due to the larger 73mm exhaust side, it is best fitted for hot street applications. Towing not recommended with this turbo. For the best street manners, your tire size, gear ratio and converter setups will be vital to keeping this drivable.

This turbo will support 800HP on a 2003-2007 5.9L Dodge depending on elevation and turbine choice and flows approximately 98 lbs/minute.

Injector recommendations
150-225HP Injectors with ECM tuning/ Programmer

Accessories Included:
• 2.75" Elbow with Tight Radius for 2003-2018 Dodge Cummins
• Clamp and O-ring for Tight Radius Elbow
• Overboost Resistor
• Oil Inlet Fitting and Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket